ES Heating Systems £22.00 ES Film™ heating elements are very simple and quick to install. The design is a 'dry' system and requires no wet adhesives. The job is complete when the electrical connections have been made. Since there are no adhesives to dry out, you can switch it on and use it straight away.
ES Film™ heating - a system built heating the new generation, based on the most modern technology and gain recognition in thousands of worldwide homes.
ES Film™ operates at the normal 230/240V mains voltage and is controlled by means of the fully programmable ES-Therm™ thermostat.
Technical Data
• Semi-conductive carbon film within a laminated polyester film
• ES-Film™ 130 Watt 80: width 500mm - heated 470mm
• Ultra-thin adds less than 0.4mm to floor depth
• Cold tail lead conductor csa1.5mm²
• Operating 230/240 V: 50Hz
• Output rating 130W/m²
• 1 x Brown 3-metre long 'cold tail' connection leads (Longer upon request)
• 1 x Blue 3-metre long 'cold tail' connection leads (Longer upon request)
• Double insulated to Class 2 construction
• CE marked and complies with all relevant technical standards
Quotes:
For a quote please send a drawing of the room/s, with measurements of every wall and where any obstacles are. One of our team will contact you with a quote and answer any questions you may have.
Each heating system is made to measure so please allow 7-14 working days for delivery.
Simple to install - The installation is so simple it can be done by anyone with even the most basic DIY skills, leaving your electrician to connect it up to the mains for you.
What do you need and Prices:
• thermostat-29.00 GBP
• heating film-m²/22.00 GBP
• moisture barrier-10m²/16.00 GBP
• cable-please call for price
Before you call us please do measuring up-It is extremely important to measure area correctly; re check your measurements before attempting to fit the cable. If the cable has been taken off the reel and it does not fit we will not accept it as a return.
Measure the room; avoiding all permanent fixtures e.g. showers, baths, fixed units etc., this is important to avoid causing possible damage to the floor due to 'thermal blocking'; this is when the heat cannot radiate from that part of the floor because it is being blocked by a solid object e.g. a kitchen unit which results in localised heat build up. Once you have calculated the total area to cover; reduce this figure by 5% to allow for the perimeter clearance.
Output Requirements-Apart from timber floors where 100 W/m² output is recommended, install the optimum heat level possible for the available floor area. Different heat levels can be achieved by varying the cable spacing: 160 W/m² for optimum output use 70mm spacing 130 W/m² for comfort heating use 90mm spacing and 100 W/m² for background heating use 110mm spacing (Recommended for timber floors).
Greater areas can be achieved by laying individual cables; in any configuration and connecting them in parallel.
All cables are backed by a manufacturers 20-year guarantee, but they should last you a lifetime! The thermostat is guaranteed for five years from date of purchase.
